Siding a Home - Vinyl, Metal, Wood Shingles

Siding a Home in Brunswick Maine

The Basics of Siding a Maine Home

Millions of people are using vinyl to replace chipped or rotted siding on their homes. The attractive appearance and the easy maintenance of vinyl appeal to contractors and homeowners alike. Another appealing feature is the ease of installation. A homeowner can cut the cost of siding a Home in half if he does the installation himself, and the job is not as difficult as it may at first seem.

Preparing the side of your Home for Work

The most important thing to remember about vinyl siding is that it requires a flat surface to attach the material to, no uneven edges. That means either completely removing the old veneer, be it wood or brick, down to the plywood of the frame or adding a rigid type of foam board. As with any job, having the right tools ahead of time will make the job easier. Thankfully, siding a Home requires only tin snips, a knife, a hammer, and galvanized roofing nails. The crucial part of installation is planning the layout. Setting up an installation design beforehand will keep the homeowner from backtracking when he comes to a window, door, or other obstruction in the wall. Thorough preparation beforehand means fewer mistakes and easier cleanup afterward.

Installation of the Vinyl Siding products by Local Contractors

Using the preplanned layout, the installer shoulder line up the rows all the way around the Home to make sure they are even. The 12-foot long pieces of siding can then be cut with tin snips or a knife; if using a knife, you need only excoriate the surface and then bend to break. Starting at the bottom of the Home and using a starter strip, you can begin attaching the vinyl pieces with the nails in the designated slots, being sure not to attach them too snugly. The siding should be able to slide back and forth over the nail, which allows the vinyl to contract and expand with changes in weather. The pieces then overlap and interlock as you move upward in the process of siding a Home. If at all possible, try not to have thin pieces under windows since these can more easily come free. Following the instructions included with the vinyl siding will get the job done right.

Finishing the Vinyl Siding Home Improvement project

Every job will look more finished and professional with the appropriate trim work. Soffitt and fascia complete the underside of the roof where it extends past the walls. Trim pieces around doors, windows, and corners bring everything together by covering cut lines and jagged edges for a unified, seamless look. Siding a Home should never stop with just the vinyl slats. As the saying goes, "A job worth doing is worth doing right."

With a good instructions and a little practice, siding a Home can be a skill set for any homeowner. And with so many colors and designs to choose from, your Home can truly be your home with all the pride that comes with doing the job yourself.

Read a related article on Siding a House or fill out our Free Vinyl Siding Estimate Form, online!

Share This Maine Siding Article: