Prices for Siding Installation in Maine

Prices for Siding in Maine

How to Install Vinyl Siding

Because of the myriad of different types of siding available when we talk about how to install siding here we will give a general overview of how a contractor goes about installing siding of some of the major varieties. Some of the procedures will change between the different types of siding purchased, but many of the principles hold true through most types of siding.

Preparing the House for new Siding Installation

Probably the most important step in how to install siding is starting off making sure the house is properly prepared. If the old siding needs to be torn off or there is no siding to begin with the first thing to do is to make sure the plywood on the house is still good by checking for any breaks or rotting boards. Once any of these boards are replaced, the house must then be wrapped in house wrap. House wrap is used to insulate, protect the plywood, and most also help prevent any mildew from forming under the siding.

During preparation studs are usually marked some way, most commonly with chalk lines. Once these steps are done the preparation of the house is finished and so we move on to how to install siding.

Attaching the Siding with an Expert Contractor

This is where the methods of installing siding begin to differ. Depending on the type of siding different pieces of trim are necessary. We will look at a couple of the most common (and most different) types of siding to get a general idea of the scope of installing siding. Stucco is a siding which is applied directly to the house. In order to make sure the walls of the house dry properly and don't rot, usually two layers of house wrap are used when applying stucco. After these two layers are applied, a mesh layer is nailed onto the side of the house using the studs which were previously marked. Over this mesh layer several layers of the cement-like stucco mixture are applied and then eventually the stucco will harden as it dries. Vinyl siding is usually easier to apply in that it can be applied directly over some existing sidings. A trim piece called a starter strip is placed at the bottom of the wall where the siding will be installed, and then vinyl planks are hooked to it and one another going up the wall. Trim is also added around windows, doors, and on the corners of the house to cover the small gaps between the end of the vinyl planks and these objects. These gaps are needed to allow the vinyl to expand and contract when in hot or cold weather.

Call Today for a Free Estimate on your Siding Project

Some sidings need to be painted or mildew treated after installation and some are ready to go after installation is finished. Because of the many different kinds of siding, how to install siding may differ from the types presented here, so you should ask your contractor about the specific siding you are choosing.




Read a related article on Prices for Vinyl Siding Maine or fill out our Free Vinyl Siding Estimate Form, online!

Share This Maine Siding Article: