Metal Roofing in Maine - Steel, Aluminum and Rolled

Metal Roofing Installations and Repairs

Kinds of Roof Systems in Southern Maine

One can find two classes of roof systems utilised at this time; these are named low slope roofing and steep slope roofing. Low slope roofs are impermeable to water, and are installed at an angle of 14 degrees or much less. Steep slope roofs shed water along their coverings, that are installed at an angle higher than 14 degrees.

Low Slope Roofing Contractors

Roofs which are mentioned to become "low slope" are individuals which are as well low to accommodate tiles or shingles, which rely on the slope with the roof for water to drain. Low slope roofs are also generally named flat roofs. Most of these low slope roofs are comprised of three distinctive components. The very first portion is definitely the weatherproof layer, or layers, which is designed to help keep out moisture. The second component may be the reinforcement layer, which confers stability, strength, and resistance for the roof. The third aspect could be the surfacing, which protects the other layers from the weather as well as the sun. Depending in your alternative of surfacing, this layer could also offer for resistance against hail and fire, and can improve the roof's ability to reflect rays from the sun.

One can find various components employed in low slope roofing. Built-up roof (BUR) coverings, also known as "hot roofs," are layers of paper held together with asphalt. You can find also other varieties of several layer systems working with polymer-modified bitumen sheet membranes. Single layer, or single ply, systems could be referred to as "rubber" roofs, and are made from chemically modified materials assembled and welded together in overlapping layers. Also, there are actually roof systems based on spray polyurethane foam, a liquid composed of two several components and applied in varying thicknesses. Structural metal panels may possibly also be implemented in low slope roofing covering.

Steep Slope Roofing Installations in Maine

Roof systems classified as being "steep slope" are roofs that have individual pieces, which includes shingles or tiles, assembled with each other. You can get also 3 typical elements to a steep slope roof. The very first component is known as a roof deck, which gives structure and typically consists of a material according to wood. Following the roof deck could be the second component, which can be the underlayment. The underlayment provides an supplemental protective barrier against moisture, and is utilised as temporary external protection even though the major roof covering if getting installed. The roof covering could be the third component, and functions as the outermost protective material by shedding water along its slope.

There are plenty of totally different custom coverings for steep slope roofs, on the other hand, most covering components fall into among the list of following categories. Synthetic coverings are composed mainly of recycled rubber or plastic, and have only been utilized for the last twenty years. Wood shakes and wood shingles are coverings obtained especially from redwood, pine, cypress, and western red cedar trees. Slate roofing is known as a nonabsorbent, all-natural material. Asphalt shingles are a roofing material developed with organic felt or glass-fiber mat as the key ingredient. Clay tile and concrete tile, and Metal may perhaps also be utilised as covers in steep slope roofing.

Read a related article on Metal Siding or fill out our Free Vinyl Siding Estimate Form, online!

Share This Maine Siding Article: